La spécification de couple gravée au laser (18 po-lb) élimine les approximations et garantit une cohérence absolue à chaque installation.
// TECHNICAL SPECIFICATIONS
SPÉCIFICATIONS DU PRODUIT
Diamètre du tube de la lunette
25.4MM /30MM / 34MM(Variant Options)
Type de rail
Picatinny Rail (MIL-STD-1913)
Type de montage
Two-piece design
Précision du retour à zéro
0.01
Concentricité
≤0.01MM/M
Chant MOA
0
Résistance aux chocs
≥1000G
Méthode de verrouillage
Two-screw locking
Matière principale
6061-T6
Finition de surface
Hard Anodized Finish
Processus de fabrication
CNC One-piece Machined
Modèle
34MM-1.45 Haut
Poids net
167.0g
Poids brut
217.5g
Modèle
34MM-1.26 Moyen
Poids brut
152.0g
Poids brut
202.5g
Modèle
34MM-0.97 FAIBLE
Poids net
134.0g
Poids brut
182.5g
Modèle
30MM-1.45 Élevé
Poids net
161.0g
Poids brut
212.0g
Modèle
30MM-1.26 Med
Poids net
151.0g
Poids brut
202.5g
Modèle
30MM-0.97 FAIBLE
Poids net
134.0g
Poids brut
185.5g
Modèle
25,4MM-0,95 FAIBLE
Poids net
133.0g
Poids brut
183.5g
Modèle
25.4MM-1.26 Moyen
Poids net
150.0g
Poids brut
201.0g
// WHY DISCOVERYOPT
Conçu pour la précision
Rodage interne au niveau du micron
Les tolérances d’usinage ordinaires créent des points de contrainte qui peuvent écraser les tubes de lunette ou provoquer un déplacement interne du réticule sous l’effet du couple.
- Contact à 100 % de la surface, répartition uniforme de la pression.
- Aucun dommage aux tubes - aucune cale requise.
// TECHNOLOGY
Conçu avec précision
Finition anodisée dure de type III avec une surface ultra-mate pour une résistance supérieure aux rayures et à la corrosion.
Finition anodisée conforme aux normes militaires
Contact à 100 % de la surface pour une pression uniformément répartie.
Rodage interne au micron près
Veillez à ce que l'erreur de coaxialité entre les deux axes internes soit presque nulle. Veillez à ce qu'il n'y ait aucune erreur axiale lors du montage de la lunette afin d'obtenir une plus grande précision.
Garantie de précision
📏 FITMENT GUIDE
Mount Fitment Assistant
×Recommended Center Height:
SHOP NOW
Note: Data is for reference only. Actual clearance may vary based on specific rifle setup.
// COMMON QUESTIONS
Des questions ?
Nous avons rassemblé les questions les plus fréquentes de nos clients. Si vous avez besoin d'autre chose, notre équipe d'assistance est toujours là pour vous aider.
Nous offrons une garantie à vie avec couverture complète pour certains produits. Si votre produit se casse ou ne fonctionne pas correctement, nous le réparerons ou le remplacerons gratuitement.
Aucune inscription ni aucun reçu n’est requis. Votre produit Discoveryopt est automatiquement couvert.
Non, les accessoires sont exclus. Cependant, vous pouvez les retourner gratuitement dans les 30 jours suivant l’achat.
Perte, vol, dommages intentionnels et dommages esthétiques qui n’affectent pas les performances.
Réparation ou remplacement gratuit si le produit tombe en panne ou fonctionne mal. S’il ne peut pas être réparé, nous le remplacerons par un produit neuf offrant des performances équivalentes ou supérieures.
Contactez simplement notre équipe d’assistance par e-mail. Aucun reçu n’est requis.
Dans la plupart des cas, les clients paient les frais d’expédition vers notre centre de service, et Discoveryopt prend en charge les frais de retour du produit réparé ou remplacé.
Les délais de traitement peuvent varier, mais nous nous efforçons de traiter toutes les demandes de garantie aussi rapidement que possible.
Vous pouvez soit trouver « Chat » dans le coin inférieur gauche du site Web pour communiquer directement avec nous, soit nous envoyer un e-mail à 📧support@discoveryopt.com.
Notre objectif est de vous garantir un produit qui répond à vos besoins. Si vous n’êtes pas satisfait, nous travaillerons avec vous jusqu’à ce que le problème soit résolu.
Vous ne trouvez pas ce que vous cherchez ? Notre équipe d’assistance technique est prête à vous aider.
Contacter l’assistanceCustomers praised these aluminum scope rings for exceptional quality and value. "Best set of rings I have ever used," said shoppers, noting excellent machining, precision fit, and factory lapping. Torque specs printed on rings were highly appreciated. Most found them sturdy and reliable for various calibers. Some concerns: one reported scratches on scope, delivery times, and sizing issues.
M
30MM-1.26 Med
Packaged great, came with two extra screws, very professional all around package. Rings marked with torq specs and serial numbers for top and bottom so you keep a true set of tops and bottoms together since they are factory lapped.
J
34MM-1.26 Med
I am blown away with my scope rings and scope that I have purchased from you my DISCOVERYOPT
ED-PRS GEN2 5-25X56SFIR FFP-Z scope is brilliant the quality of the glass is fantastic. The fit and finish is great. The Turt adjustment is very positive. and his extremely instinctive and easy to operate with great features. I also particularly like the scope levelling kit which is a fantastic bonus with your package and I will definitely be adding an LPVO scope and a ED-LHT GENⅡ 3-15X50-Z in the future. Also, your scope rings are some of the best I’ve ever used excellent fit and finish and great zero retention I fitted the rings and scope and shot some fantastic groups out of my Mauser m25 max .308 calibre . I removed the scope and rings to adjust my trigger the scope came off and went back on with no damage to the mounts or the Gun and has kept its zero perfectly. I am very impressed with your products and their fantastic Price point and have made two videos on my YouTube channel. https://youtu.be/vi7pdHuotzY?is=KxUyOenSOCDxDC2Q https://youtu.be/z0OhM6W1mw4?is=-HnFyFZ2HZA8rdIY Thank you very much James
h
34MM-0.97 Low
I initially bought the high rings to make sure it cleared the barrel of my cz mtr which I received promptly but then realized I had plenty of room so I bought the low rings and didn't need to build up such a high cheekrest...shipping was only a couple days and the quality far exceeds the price...the torque setting engraved on the rings makes mounting quick and efficient
J
34MM-1.26 Med
Best set of rings I have ever used in my opinion smooth as glass
C
30MM-1.45 High
Fit well
P
30MM-0.97 Low
Netjes gemaakt goede oppervlakte behandeling en goede passing
A
34MM-1.26 Med
Son unas anillas muy buenas.
H
30MM-1.26 Med
Greatfeeling and looking rings I like the 6 bolt set up and the specs displayed on them
J
30MM-1.26 Med
Great mounts, sturdy and easy to mount! Completely recommended
A
34MM-1.26 Med
Quality of the scope rings are fantastic! Love the torque specs are written on the rings, quick and easy setup for mounting. Great to use with Discovery scopes. Very satisfied!
M
30MM-1.26 Med
I think these rings are going to perform the same if not better with the other more expensive rings.my favourites are MDTs but discovery 6061 rings are neck to neck.i have 34,35,and 30mm there are all 6061 in 1.26 height,ordering in 0.97 to try it out.
S
25.4MM-0.95 Low
Perfection fit
R
Truly a Best Buy. Every bit a good as rings at 3-4X the cost. Use it on my target 22lr with incredible results. Definitely on my buy again list!
D
I installed these 30mm rings on a Ruger precision which is similar to an AR platform. My scope has a 50mm front reticle so I needed the medium height which were the 1.26". The packaging was top notch. This set came with the torx wrench and 2 extra screws. Very pleased with this product.
J
I got these in today and I am impressed. I run Leupold and Vortex scope rings because im a snob, but these things are amazing. They come pre-lapped. Easy to install with the torque printed on the side of them, which is awesome! Its beyond value for the money! They fit my Arken EP5 5-25x56mm with a 20 MOA scope base on my Remington SPS about 1" to spare from the bell to the barrel. Im going to buy another set for a few more of my other rifles.
F
I waited quite a while for these, but they were worth the wait...Build, fit and finish are great. The only thing additional I could think to ask for would be pre-applied thread-locker--nothing some blue loctite won't solve.
D
I have been competitively shooting since I was 16. I am now 6 decades older than that. I have numerous rifles that are now scoped because I have old eyes that don't want to focus on the front sight of an iron sight set. I have a precision bolt action in .308W that these rings are going to find themselves attached to.The Good:1. Meticulously made2. No sharp edges anywhere.3. Comes with extra screws4. Comes with the appropriate T wrench to tighten screws5. Fits Picatinny rail nicely6. Even the plastic case is nicely madeThe Not So Good - absolutely nothing. Highly recommended.
M
Well made set of scope rings. Precisely machined and finished. Not too heavy but built tough. Measurements are impressively accurate and consistent. Inside of rings have been lapped to a nearly mirror finish.This style ring is my preference as you can mount them on whatever platform, then lay the scope in the bottom half of rings to get cant and positioning right before adding top half.
