Instructional video on how to use the scope leveling tool
- 1. Secure the rifle's scope and place it on a level surface.
- 2. Use magnification to check if the reticle appears skewed. If so, proceed to adjust.
- 3. Loosen leveling kit lock nuts.
- 4. Rotate leveling screws using an Allen wrench to level the scope against the reference surface, visually or with assistance.
- 5. Make fine adjustments by half-turns and check the effect until perfectly level.
- 6. Re-tighten screws on both sides to lock in position.
- 7. Recheck and shooting may commence if balanced. Repeat the process as needed.